薄膜LDPE,吹膜LDPE,低密度聚乙烯LDPE SABIC® LDPE 2201TS41是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
高抗结块性, 芥酸酰胺润滑添加剂, 抗氧化性, 低光滑性, 光学性能, 高抗结块性, 薄膜, 吹塑薄膜
SABIC® LDPE 2201TS41
低密度聚乙烯
Saudi Basic Industries Corporation (SABIC)
Technical Data
产品说明
Description
SABIC® LDPE 2201TS41 is a grade with a very high amount of anti block and a low amount of slip erucamide. The grade contains anti oxidant. The grade shows good optical properties.
Application
SABIC® LDPE 2201TS41 is specially developed for applications where stabilisation is required during extrusion, storage and usage. Films from this grade show low reblocking values.
The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.
总体
材料状态 • 已商用:当前有效
• Processing - BOPP Film (English)
资料 1 • Processing - Cast Film (English)
• Processing - Tape (English)
• Technical Datasheet (English)
搜索 UL 黄卡 • Saudi Basic Industries Corporation (SABIC)
供货地区 • 欧洲
添加剂 • 高抗结块性 • 芥酸酰胺润滑添加剂 • 抗氧化性
特性 • 低光滑性 • 光学性能
• 高抗结块性 • 抗氧化性
用途 • 薄膜
加工方法 • 吹塑薄膜
物理性能 额定值单位制 测试方法
密度 0.922g/cm³ ISO 1183/A
熔流率(熔体流动速率) (190°C/2.16 kg) 0.85g/10 min ISO 1133
薄膜 额定值单位制
薄膜厚度 - 经测试 50µm
补充信息 额定值单位制 测试方法
Antiblock Additive 2500mg/kg 内部方法
Slip Additive 200mg/kg 内部方法
Film properties have been measured at film of 50 µm with a BUR = 3. The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm.
薄膜LDPE,吹膜LDPE,低密度聚乙烯LDPE SABIC® LDPE 2201TS41是东莞市双帮塑胶原料有限公司常年销售的塑料,因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告,COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法,塑料牌号太多,本网站没有提供的本公司也有代理,详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
|